Feel free to browse our different product categories listed on this page, and see the M&M Lifts, Inc. difference by yourself!
All models of M&M Lifts, Inc. Aerial Lifts comply with ANSI A-92.2 1990 and OSHA 1926.556, 1910.67 regulations.
M&M Lifts, Inc. reserves the right to make changes to our products or specifications at any time without notice or obligations.
| USA-LIFT HD/HDI 32 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
9.80 m |
32.10 ft |
|
Working height |
11.30 m |
37.10 ft |
|
Horizontal reach |
5.90 m |
19.50 ft |
|
Outriggers |
4 |
|
Standard platform capacity |
200 kg |
440 lbs |
|
Continuous rotation |
360° |
|
Weight of lift and mounting |
1090 kg |
2398 lbs |
|
Stowed travel height |
2.80 m |
9.10 ft |
CONTROLS
Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
Engine start / stop at platform and pedestal is standard.
Hydraulic controls at platform and base
Hydraulic tool power at platform.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
165 bar |
2360 psi |
|
Hydraulic pump flow |
7.6 lpm |
2 gpm |
SAFETY
Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)
MECHANICAL SYSTEM
Leveling system: is fully automatic by aircraft cable and parallelogram
system.
Rotation: achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. With the help of a hydraulic swivel joint, rotation is continuous
BOOM ACTION
Lower boom articulation: -1º to +95º
Upper boom articulation: -95º to 80º
| MINIMUM RECOMMENDED VEHICLE |
|
|
|
G. V. W. |
6800 kg |
14991 lbs |
|
Load capacity |
4000 kg |
8818 lbs |
|
Wheelbase minimum |
4.20 m |
13.7 ft. |
The USA-LIFT HD 32 Aerial Lift is NON INSULATED and is not intented for use on energized lines or apparatus. The HDI 32 model IS INSULATED.
| USA-LIFT M/MI 34/10 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
8.70 m |
28.50 ft |
|
Working height |
10.30 m |
33.90 ft |
|
Horizontal reach |
4.70 m |
15.40 ft |
|
Aperture angle |
135º |
|
Outriggers |
4 |
|
Outriggers maximum extension |
2.90 m |
9.50 ft |
|
Standard platform capacity |
136 kg |
300 lbs |
|
Continuous rotation |
360° |
|
Weight of lift and mounting |
790 kg |
1740 lbs |
|
Stowed travel height |
2.50 m |
8.20 ft |
CONTROLS
Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
Engine start / stop at platform and pedestal is standard.
Hydraulic controls at platform and base
Hydraulic tool power at platform.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
165 bar |
2360 psi |
|
Hydraulic pump flow |
7.6 lpm |
2 gpm |
SAFETY
Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)
MECHANICAL SYSTEM
Leveling system: is fully automatic by aircraft cable and parallelogram
system.
Rotation: achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. With the help of a hydraulic swivel joint, rotation is continuous
BOOM ACTION
Lower boom articulation: -5º to 81º
Upper boom articulation: -81º to 65º
| MINIMUM RECOMMENDED VEHICLE |
|
|
|
G. V. W. |
5250 kg |
11660 lbs |
|
Load capacity |
3000 kg |
6600 lbs |
|
Wheelbase minimum |
4.00 m |
155 in |
The USA-LIFT M 34/10 Aerial Lift is NON INSULATED and is not intented for use on energized lines or apparatus. The MI 34/10 model IS INSULATED.
| USA-LIFT M/MI 36/11 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
9.30 m |
30.40 ft |
|
Working height |
10.90 m |
35.80 ft |
|
Horizontal reach |
4.90 m |
16.00 ft |
|
Aperture angle |
135º |
|
Outriggers |
4 |
|
Outriggers maximum extension |
2.90 m |
9.50 ft |
|
Standard platform capacity |
136 kg |
300 lbs |
|
Continuous rotation |
360° |
|
Weight of lift and mounting |
830 kg |
1830 lbs |
|
Stowed travel height |
2.50 m |
8.20 ft |
CONTROLS
Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
Engine start / stop at platform and pedestal is standard.
Hydraulic controls at platform and base.
Hydraulic tool power at platform.
Air line at platform.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
165 bar |
2360 psi |
|
Hydraulic pump flow |
7.6 lpm |
2 gpm |
SAFETY
Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)
MI Model: Electrical insulation. These lifts are tested for a 46kV and below Category C rating.
MECHANICAL SYSTEM
Leveling system: is fully automatic by aircraft cable and parallelogram
system.
Rotation: achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. With the help of a hydraulic swivel joint, rotation is continuous.
BOOM ACTION
Lower boom articulation: -5º to 81º
Upper boom articulation: -81º to 65º
| MINIMUM RECOMMENDED VEHICLE |
|
|
|
G. V. W. |
5250 kg |
11660 lbs |
|
Load capacity |
3000 kg |
6600 lbs |
|
Wheelbase minimum |
4.00 m |
155 in |
The USA-LIFT M 36/11 Aerial Lift is NON INSULATED and is not intented for use on energized lines or apparatus. The MI 36/11 model IS INSULATED.
| USA-LIFT M/MI 43/13 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
11.30 m |
37.20 ft |
|
Working height |
13.00 m |
42.70 ft |
|
Horizontal reach |
5.20 m |
17.00 ft |
|
Outriggers |
4 |
|
Outriggers maximum extension |
2.90 m |
9.60 ft |
|
Rated platform capacity |
135 kg |
300 lbs |
| Stowed Travel Height |
2.90 m |
9.60 ft |
|
Continuous rotation |
360° |
|
Weight of lift and mounting |
980 kg |
2180 Lbs |
CONTROLS
Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
Full hydraulic controls at platform and pedestal.
Engine start / stop at platform and pedestal is standard.
Hydraulic tool power circuit at platform.
Air line at platform.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
165 bar |
2360 psi |
|
Hydraulic pump flow |
7.6 lpm |
2 gpm |
SAFETY
Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)
MECHANICAL SYSTEM
Leveling system: is fully automatic by aircraft cable and parallelogram
system.
Rotation: achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. With the help of a hydraulic swivel joint, rotation is continuous
EMERGENCY OPERATION
Manual pump, located in the pedestal.
BOOM ACTION
Lower boom articulation: -5º to 78º
Upper boom articulation: -78º to 65º
| MINIMUM RECOMMENDED VEHICLE |
|
|
|
G. V. W. |
5250 kg |
11660 lbs |
|
Load capacity |
3000 kg |
6600 lbs |
|
Wheelbase minimum |
4.00 m |
13 ft |
OPTIONS
Pedestal spacers.
Bucket cover.
Emergency operating system (12 VDC)
Articulated outriggers.
The USA-LIFT M 43/13 Aerial Lift is NON INSULATED and is not intented for use on energized lines or apparatus. The MI 43/13 model IS INSULATED.
| DUR-A-LIFT DO-32 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
9.60 m |
32.00 ft |
|
Working height |
11.10 m |
37.00 ft |
|
Horizontal reach |
10.50 m |
26.30 ft |
|
Outriggers |
2 |
|
Rated platform capacity |
160 kg |
350 lbs |
|
Weight of lift and mounting |
1090 kg |
2400 Lbs |
CONTROLS
Full pressure proportional controls mounted on the basket for easy access in all boom positions.
Upper control shut-off provided at turntable.
Three control levers at the turntable and basket with a deadman at the basket.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
153 bar |
2000 psi |
|
Hydraulic pump flow |
18-23 lpm |
5-7 gpm |
SAFETY
Integral holding valves in each cylinder.
Pressure relief valve.
Upper boom constructed of fiberglass and rated for work voltages of 46kv and below.
Non-conductive hoses and fiberglass rods provide levelling and control through the insulated boom section.
Emergency stop system.
MECHANICAL SYSTEM
Levelling system: is fully automatic by totally enclosed glass rods and chain parallelogram system.
Rotation: is hydraulically driven spur gear with shearball rotation bearing.
BOOM ACTION
Lower boom articulation: 100º
Upper boom articulation: Up to 196º
OPTIONS
Continuous Rotation.
Pedstal mounted outriggers.
Torsion bar.
12V DC full function backup system.
Single hand control lever.
Basket liner.
Basket and control cover.
Hydraulic tool circuit at basket and pedestal.
Basket tilt system.
Automatic or two-speed throttle advance.
Upper boom electrical test bands.
Lower boom fiberglass insert.
Lower boom lifting hook.
| DUR-A-LIFT DO-36 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
10.90 m |
36.00 ft |
|
Working height |
12.40 m |
41.00 ft |
|
Horizontal reach |
9.20 m |
30.20 ft |
|
Outriggers |
2 |
|
Rated platform capacity |
160 kg |
350 lbs |
|
Weight of lift and mounting |
1135 kg |
2500 Lbs |
CONTROLS
Full pressure proportional controls mounted on the basket for easy access in all boom positions.
Upper control shut-off provided at turntable.
Three control levers at the turntable and basket with a deadman at the basket.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
153 bar |
2000 psi |
|
Hydraulic pump flow |
18-23 lpm |
5-7 gpm |
SAFETY
Integral holding valves in each cylinder.
Pressure relief valve.
Upper boom constructed of fiberglass and rated for work voltages of 46kv and below.
Non-conductive hoses and fiberglass rods provide levelling and control through the insulated boom section.
Emergency stop system.
MECHANICAL SYSTEM
Levelling system: is fully automatic by totally enclosed glass rods and chain parallelogram system.
Rotation: is hydraulically driven spur gear with shearball rotation bearing.
BOOM ACTION
Lower boom articulation: 100º
Upper boom articulation: Up to 196º
OPTIONS
Continuous Rotation.
Pedstal mounted outriggers.
Torsion bar.
12V DC full function backup system.
Single hand control lever.
Basket liner.
Basket and control cover.
Hydraulic tool circuit at basket and pedestal.
Basket tilt system.
Automatic or two-speed throttle advance.
Upper boom electrical test bands.
Lower boom fiberglass insert.
Lower boom lifting hook.
|
