Feel free to browse our different product categories listed on this page, and see the M&M Lifts difference by yourself!
All models of Aerial Lifts shown comply with ANSI A-92.2 1990 and OSHA 1926.556, 1910.67 regulations.
M&M Lifts, Inc. reserves the right to make changes to our products or specifications at any time without notice or obligations.
| DUR-A-LIFT DTA/DTAS-31 FP |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform
|
9.45 m |
31.00 ft |
|
Working height
|
11.00 m |
36.00 ft |
|
Side reach (side hung)
|
6.55 m |
21.50 ft |
|
Side reach (end hung)with rotator
|
7.16 m |
23.50 ft |
|
Basket capacity (side hung)
|
158 kg |
350 lbs |
|
Basket capacity (end hung)with rotator
|
136 kg |
300 lbs |
|
Approx. Weight
|
1044 kg |
2300 lbs |
|
Stowed travel height
|
2.92 m |
9.60 ft |
|
Articulating Arm Travel
|
-2° to 80° |
|
Main Boom Travel
|
-25° to +78° |
|
Extension Travel
|
86 in. |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Operating pressure
|
140 bar |
2000 psi |
|
Rated pressure
|
155 bar |
2200 psi |
|
Hydraulic pump flow
|
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Articulating boom and turntable will not exceed width of chassis mirrors.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available.
| DUR-A-LIFT DTA/DTAS-33 FP |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform
|
10.05 m |
33.00 ft |
|
Working height
|
11.58 m |
38.00 ft |
|
Side reach (side hung)
|
7.16 m |
23.50 ft |
|
Side reach (end hung)with rotator
|
7.74 m |
25.50 ft |
|
Basket capacity (side hung)
|
158 kg |
350 lbs |
|
Basket capacity (end hung)with rotator
|
136 kg |
300 lbs |
|
Approx. Weight
|
1067 kg |
2350 lbs |
|
Stowed travel height
|
2.92 m |
9.60 ft |
|
Articulating Arm Travel
|
-2° to 80° |
|
Main Boom Travel
|
-25° to +78° |
|
Extension Travel
|
86 in. |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Operating pressure
|
140 bar |
2000 psi |
|
Rated pressure
|
155 bar |
2200 psi |
|
Hydraulic pump flow
|
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Articulating boom and turntable will not exceed width of chassis mirrors.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available.
| DUR-A-LIFT DTA/DTAS-35 FP |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform
|
10.66 m |
35.00 ft |
|
Working height
|
12.19 m |
40.00 ft |
|
Side reach (side hung)
|
7.77 m |
25.50 ft |
|
Side reach (end hung)with rotator
|
8.38 m |
27.50 ft |
|
Basket capacity (side hung)
|
158 kg |
350 lbs |
|
Basket capacity (end hung)with rotator
|
136 kg |
300 lbs |
|
Approx. Weight
|
1090 kg |
2400 lbs |
|
Stowed travel height
|
2.92 m |
9.60 ft |
|
Articulating Arm Travel
|
-2° to 80° |
|
Main Boom Travel
|
-25° to +78° |
|
Extension Travel
|
110.5 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Operating pressure
|
140 bar |
2000 psi |
|
Rated pressure
|
155 bar |
2200 psi |
|
Hydraulic pump flow
|
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Articulating boom and turntable will not exceed width of chassis mirrors.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available.
| DUR-A-LIFT DTA/DTAS-40 FP |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform (Side Hung and End Hung)
|
12.20 m |
40.00 ft |
|
Height to bottom of platform (Hydraulic Rotator)
|
13.41 m |
44.00 ft |
|
Working height (Side Hung and End Hung)
|
13.71 m |
45.00 ft |
|
Working height (Hydraulic Rotator)
|
14.94 m |
49.00 ft |
|
Side reach (Side Hung)
|
8.38 m |
27.50 ft |
|
Side reach (end hung)
|
9.00 m |
29.50 ft |
|
Side reach (Hydraulic Rotator)
|
9.15 m |
30.00 ft |
|
Basket capacity (Side Hung)
|
182 kg |
400 lbs |
|
Basket capacity (End Hung/Hydraulic Rotator)
|
159 kg |
350 lbs |
|
Approx. Weight (Side Hung/End Hung)
|
1249 kg |
2750 lbs |
|
Approx. Weight (Hydraulic Rotator)
|
1271 kg |
2800 lbs |
|
Stowed travel height
|
3.05 m |
10.00 ft |
|
Articulating Arm Travel
|
0° to 80° |
|
Main Boom Travel
|
-25° to +78° |
|
Extension Travel
|
120 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Operating pressure
|
140 bar |
2000 psi |
|
Rated pressure
|
155 bar |
2200 psi |
|
Hydraulic pump flow
|
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available (model DTAS-40).
| DUR-A-LIFT DTAX/DTAXS-39 |
| SPECIFICATIONS |
|
|
| Height to bottom of platform (Side Hung and End Hung) |
12.20 m |
40.00 ft |
| Height to bottom of platform (Hydraulic Rotator) |
13.41 m |
44.00 ft |
| Working height (Side Hung and End Hung) |
13.71 m |
45.00 ft |
| Working height (Hydraulic Rotator) |
14.94 m |
49.00 ft |
| Side reach (Side Hung) |
8.38 m |
27.50 ft |
| Side reach (end hung) |
9.00 m |
29.50 ft |
| Side reach (Hydraulic Rotator) |
9.15 m |
30.00 ft |
| Basket capacity (Side Hung) |
182 kg |
400 lbs |
| Basket capacity (End Hung/Hydraulic Rotator) |
159 kg |
350 lbs |
| Approx. Weight (Side Hung/End Hung) |
1249 kg |
2750 lbs |
| Approx. Weight (Hydraulic Rotator) |
1271 kg |
2800 lbs |
| Stowed travel height |
3.05 m |
10.00 ft |
| Articulating Arm Travel |
0° to 80° |
| Main Boom Travel |
-25° to +78° |
| Extension Travel |
120 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
| Operating pressure |
140 bar |
2000 psi |
| Rated pressure |
155 bar |
2200 psi |
| Hydraulic pump flow |
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available (model DTAS-40).
| DUR-A-LIFT DTAX/DTAXS-44 |
| SPECIFICATIONS |
|
|
| Height to bottom of platform (Side Hung and End Hung) |
12.20 m |
40.00 ft |
| Height to bottom of platform (Hydraulic Rotator) |
13.41 m |
44.00 ft |
| Working height (Side Hung and End Hung) |
13.71 m |
45.00 ft |
| Working height (Hydraulic Rotator) |
14.94 m |
49.00 ft |
| Side reach (Side Hung) |
8.38 m |
27.50 ft |
| Side reach (end hung) |
9.00 m |
29.50 ft |
| Side reach (Hydraulic Rotator) |
9.15 m |
30.00 ft |
| Basket capacity (Side Hung) |
182 kg |
400 lbs |
| Basket capacity (End Hung/Hydraulic Rotator) |
159 kg |
350 lbs |
| Approx. Weight (Side Hung/End Hung) |
1249 kg |
2750 lbs |
| Approx. Weight (Hydraulic Rotator) |
1271 kg |
2800 lbs |
| Stowed travel height |
3.05 m |
10.00 ft |
| Articulating Arm Travel |
0° to 80° |
| Main Boom Travel |
-25° to +78° |
| Extension Travel |
120 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
| Operating pressure |
140 bar |
2000 psi |
| Rated pressure |
155 bar |
2200 psi |
| Hydraulic pump flow |
19 lpm |
5 gpm |
| 10 gallon oil reservoir |
|
|
MECHANICAL SYSTEM
Telescoping and articulating boom action.
Offset main boom reduces travel height.
Shear ball rotation driven by fully enclosed worm gear box
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation (full pressure controls only).
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
180° basket rotator.
Non-insulated machines available (model DTAS-40).
The DTAS-52 FP is a specific height truck that combined with a 44' lifts gives you a total working height of 52'.
| DUR-A-LIFT DPM-36 SP/DP/MH |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform
|
11.00 m |
36.00 ft |
|
Working height
|
12.50 m |
41.00 ft |
|
Side reach (SP models)
|
8.90 m |
29.50 ft |
|
Side reach (DP & MH models)
|
8.38 m |
27.50 ft |
|
Basket capacity (SP & MH models)
|
182 kg |
400 lbs |
|
Basket capacity (DP models)
|
272 kg |
600 lbs |
|
Approx. Weight
|
1500 kg |
3300 lbs |
|
Stowed travel height
|
3.20 m |
10.60 ft |
|
Articulating Arm Travel (DP & MH models)
|
0° to 80° |
|
Articulating Arm Travel (SP models)
|
0° to 96° |
|
Main Boom Travel
|
-35° to +80° |
|
Extension Boom Length
|
96 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
DPM-36MH FEATURES
Standard 24 x 30 in. basket.
100° basket rotator.
Up to 1000 lb jib capacity.
Upper and lower winch controls.
DPM-36DP FEATURES
Standard 24 x 48 in. basket.
180° basket rotator.
600 lb basket capacity.
DPM-36SP FEATURES
Standard 24 x 30 in. basket.
180° basket rotator.
Up to 33.5 feet side reach.
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Compensated upper boom.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation.
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
Basket covers.
Tool circuits.
| DUR-A-LIFT DPM-40 SP/DP/MH |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform
|
12.20 m |
40.00 ft |
|
Working height
|
13.72 m |
45.00 ft |
|
Side reach (SP models)
|
10.20 m |
33.50 ft |
|
Side reach (DP & MH models)
|
9.60 m |
31.50 ft |
|
Basket capacity (SP & MH models)
|
182 kg |
400 lbs |
|
Basket capacity (DP models)
|
272 kg |
600 lbs |
|
Approx. Weight
|
1566 kg |
3450 lbs |
|
Stowed travel height
|
3.20 m |
10.60 ft |
|
Articulating Arm Travel (DP & MH models)
|
0° to 80° |
|
Articulating Arm Travel (SP models)
|
0° to 96° |
|
Main Boom Travel
|
-35° to +80° |
|
Extension Boom Length
|
120 in |
STANDARD FEATURES
CONTROLS
Full pressure proportional controls.
Electric/Hydraulic on non-insulated models only.
Lower controls with override located at the turntable.
Engine start/stop from the basket.
DPM-36MH FEATURES
Standard 24 x 30 in. basket.
100° basket rotator.
Up to 1000 lb jib capacity.
Upper and lower winch controls.
DPM-36DP FEATURES
Standard 24 x 48 in. basket.
180° basket rotator.
600 lb basket capacity.
DPM-36SP FEATURES
Standard 24 x 30 in. basket.
180° basket rotator.
Up to 33.5 feet side reach.
SAFETY FEATURES
Integral holding valves in all cylinders.
Pressure relief valve.
Compensated upper boom.
Non-conductive hoses.
46KV category C on insulated models.
Safety harness and lanyard.
Lower override controls.
Fiberglass extension boom.
OPTIONAL FEATURES
Continuous rotation.
12 V DC backup.
Outriggers.
Single hand controls (full pressure controls only).
Basket liner.
Throttle advance.
Fiberglass main boom.
Fiberglass articulating boom.
Basket covers.
Tool circuits.
|
