Do you want a new or used lift without the wait? These units are available for you to take out the door and put to work immediately!

Don't wait, these units will go fast!

Call us NOW at 1-866-707-2787

M&M LIFTS TM-100 - 100' WORKING HEIGHT - INCREDIBLE DEAL!
SEE FEATURES AND PRICING BELOW

    Total: $CALL

A: Ground to bottom of platform height: 87’ without 8’ manual extension, 95’ with 8’ manual extension
B: Working height: 92’ without 8’ manual extension, 100’ with 8’ manual extension
C: Horizontal reach: 39’ without 8’ manual extension, 29’ with 8’ manual extension
D: Stowed travel height: 11’ 6” (Based on a 36” frame height, and standard height pedestal without spacers).
F: Outriggers: Optional: (4) Hydraulic Flat shoes “A” frame outriggers first set mounted behind the cab, the second set mounted behind the rear axle
G: Rotation: Continuous: 360º continuous available
H: Platform leveling system: Hydraulically leveled, (Double pilot operated check valve to prevent tilt in case hydraulic hose failure)
I: Platform: Single two-man aluminum basket without 8’ manual extension 440 lbs capacity. Dimensions 24” x 24” x 42”. Curbside basket mounting
J: Insulation: Non-Insulated.
K: Hydraulic system: Open center hydraulic system 4.6 gpm. 10 Micron Filter in return line
L: Vehicle Engine: Optional Start/stop from platform. / PTO & Pump.
M: Controls: Electric over hydraulic fully proportion controls. 100% proportional controls
N: Paint: Powder coat red (other colors are available).
O: Oil Reservoir: 20-gallon oil tank with sight reservoir.
P: Hydraulic Hoses: All hoses through the entire unit are electrically insulated. (PARKER)
Q: Manuals: (2) Two, (1) operational and (1) maintenance manuals. (Extra manuals can be ordered).
R: Compliance: Meets or exceeds A.N.S.I. A92.2-2001 & Cal-OSHEA Requirements.
S: Warranty: TWO YEAR WARRANTY parts and labor
   

NIFTY-LIFT TM50T - 56' WORKING HEIGHT - INCREDIBLE DEAL!
SEE FEATURES AND PRICING BELOW

    Total: $39,998.00

A. Ground to bottom of platform height: 49’
B. Working height: 56’
C. Horizontal reach: 28’ 6”  
D: With: Traveling. 5’ 3”. Working: 14’ 4”. Axle Retracted:  6’ 3”
E: Stowed travel height: 7’ 1’
F: Weight: 4,400 Lbs.
G: Rotation: 360º degrees.
H: Platform leveling system: Hydraulic. Rotate 100º
I:   Platform: 3’ 4” x 2’ 1”, 500 lbs. capacity.
J:  Hydraulic system: Open center with filters, working pressure 2100 psi and 3.5 gpm of hydraulic pump flow.
K:  Power Source: Bi-Energy. Honda 6.5 HP/Pump and Battery’s.
L:  Controls: Fully Proportional Hydraulic.
M:  Paint:  Yellow color.    
N:  Manuals: (2) Two, (1) operational and (1) maintenance manuals.
O: Warranty: 1 year warranty parts and labor.   

NIFTY-LIFT TM34T - 40' WORKING HEIGHT - INCREDIBLE DEAL!
SEE FEATURES AND PRICING BELOW

Total: $28,499.00

A. Ground to bottom of platform height: 34’
B. Working height: 40’
C. Horizontal reach: 20’  
D: With: Traveling. 4’ 11”. Working: 11’ 8”. Axle Retracted:  6’ 3”
E: Stowed travel height: 6’ 4’
F: Weight: 3,080 Lbs.
G: Rotation: 360º degrees.
H: Platform leveling system: Hydraulic.
I:   Platform: 3’ 4” x 2’ 1”, 500 lbs. capacity.
J:  Hydraulic system: Open center with filters, working pressure 2100 psi and 3.5 gpm of hydraulic pump flow.
K:  Power Source: Bi-Energy. Honda 5.5 HP/Pump and Battery’s.
L:  Controls: Fully Proportional Hydraulic.
M:  Paint:  Yellow color.  
N:  Manuals: (2) Two, (1) operational and (1) maintenance manuals.
O: Warranty: 1 year warranty parts and labor.         

DUR-A-LIFT DVS-29DC - 34' WORKING HEIGHT - INCREDIBLE DEAL!
2 VANS AVAILABLE
SEE FEATURES AND PRICING BELOW

Total: $ 48,982.00

Aerial unit model DVS-29DC Telescopic aerial device installed behind of cab. Built in accordance to Dur-A-Lift standard specifications and include the following standard features:

A: Ground to bottom of platform height: 29’
B: Working height: 34’
C. Horizontal reach: 21’
D: Boom action: Lower boom articulation:  -5° to 80°. Upper boom extension/retraction: 9’
E: Stowed travel height: 9’ 8”
F: Stability: Rear Torsion Bar
G: Rotation: Non-Continuous 370º.
H: Platform leveling system: Gravity Leveling. Hydraulic optional.
I:   Platform: 24”x 24” x 42”, 350 lbs. capacity.
J:  Hydraulic system: Open center with filters, working pressure 2100 psi and 3.5 gpm of hydraulic pump flow.
K:  Power Source: Two Deep Cycle 6 Volt Batteries w/ Mounting Brackets and Covers.
L:  Controls: Electric over hydraulic controls.
M:  Paint:  Polyurethane white color.
N:  Manuals: (2) Two, (1) operational and (1) maintenance manuals.

DUR-A-LIFT DTAX-44/FP - 49' WORKING HEIGHT - INCREDIBLE DEAL!
SEE FEATURES AND PRICING BELOW

Total: $  54,997.00

Aerial unit model DTAX-44/FP Articulated/Telescopic, aerial device installed behind the cab of the chassis. Built in accordance to Dur-A-Lift standard specifications and include the following standard features:

A: Ground to bottom of platform height:  44’
B: Working height:  Bucket rotator 49’
C: Horizontal reach: 28’ to the outer edge of the bucket.
D: Boom Actions: Lower boom -2º to +80º. Upper boom: -25º to +78º.
E: Stowed travel height:  10’   (Based on a 36” frame height, and standard height pedestal without spacers).
F: Outriggers: Optional:  (2) Hydraulic Flat shoes “H “frame, with two spool valve. Mounted behind the cab chassis.
G: Rotation: Continuous: 360º continuous.
H: Platform leveling system: Hydraulically leveled, (Double pilot operated check valve to prevent tilt in case hydraulic hose failure).
I: Platform: 350lbs: *Capacity, single one-man end mounted. Dimensions 24” x 24” x 42”.  Curbside basket mounting.
J: Insulation:  NON Insulated.
K: Hydraulic system: Open center hydraulic system 5-6 gpm. 10 Micron Filter in return line.
L: Vehicle Engine: Start/stop from platform. / Cluch Pump or Honda Engine.
M: Controls: Full pressure, hydraulics at platforms and pedestal. Controls are proportional and interactive. Individual self-locking for safety.
N: Paint:  Polyurethane white color.
O: Oil Reservoir: 10-gallon oil tank with sight reservoir.
P: Hydraulic Hoses: All hoses through the entire unit are electrical insulated. (PARKER)
Q: Manuals: (2) Two, (1) operational and (1) maintenance manuals. (Extra manuals can be ordered).
R: Compliance: Meets or exceeds A.N.S.I. A92.2-2001 & Cal-OSHEA Requirements.

USA-LIFT M43/13 - 43' WORKING HEIGHT - INCREDIBLE DEAL!
SEE FEATURES AND PRICING BELOW

Total: $ 57,927.00

Aerial unit model M 43/13 Articulated aerial device installed over rear axle built in accordance to M&M Lifts standard specifications and includes the following standard features:

A: Ground to bottom of platform height: 37’ 2”                             
B: Working height:  42’ 7”
C: Horizontal reach:  18’ 3”
D: Aperture angle: 135°
E: Stowed travel height:   112.6”
F: Outriggers:  Radio outriggers, swivel shoe with two-spool Holding valve or “A” Frame.
G: Rotation: Continuous 360º degrees.
H: Platform leveling system: Galvanized steel cable in parallelogram arrangement to provide positive bucket leveling in all boom position.
I: Platform: Single one man side hung.
J: Hydraulic system: Open center with filters, operated at 2150 psi. and 2.5 GPM.
K: Engine: Honda engine drive pump unit with electric starter. Engine start/stop at platform and pedestal.
L : Controls: Full hydraulic, proportional & interactive controls at platformsand pedestal.
M: Hydraulic tool power: Installed at platform, w/ two quick disconnects.N: Paint:  Polyurethane white color.
O: Manuals: Two (2), (1) operational and (1) maintenance manuals.
P: Insulation: Optional

* Our prices do not include delivery licensing fees or state taxes.
* Terms: COD a 25% deposit will be required at time of order.
* Availability: 1 unit in stock, next available 90-120 days depending at time of order.
* FOB: Buena Park, CA.
* Financing and leasing available.

All models of M&M Lifts comply with ANSI A-92.2 1990 and OSHA 1926.556, 1910.67 regulations.
M&M Lifts, Inc. reserves the right to make changes to our products or specifications at any time without notice or obligations.